2in Cylinder Mold
Cement Molds
Model #: 2in Cylinder Mold
Description
Cement Test Equipment 2 inch diameter, 4 inch long, 3 gang cylinder molds are made in accordance to ASTM C31, C39, and C192. The molds may be used in pressurized or non-pressurized water baths. The molds are cast and machined from high quality brass in the USA. Noncorrosive, stainless steel bolts, top and bottom covers are ultra durable and will last a very long time with proper handling and maintenance. Each set of molds produces three 2 inch diameter, 4” long cylindrical specimens. Each set contains two halves, a top and a bottom plate which can be disassembled after a test, cleaned and then reassembled. Thin grooves are milled onto one side of the top plate to allow fluid pressure penetration into the specimen. The molds are designed primarily to lay flat however the top plate may be turned over to block fluid penetration into the sample allowing the molds to be oriented in any direction without cement pouring out. Optional stainless steel bucket available for water/oil separation testing requirements.
Downloadables
SPECIFICATIONS
Number of Specimens = 3
Weight = 3.6lbs(2.7kg)
Overall Dimensions = 7.5”Long x 3.75”Wide x 7”Tall; (19cm x 9.5cm x 17.8cm)