Tensile Briquette Mold

Cement Mold

Model #: Tensile Briquette Mold


Cement Test Equipment tensile strength briquette molds are made in accordance to ASTM specification C307. The molds may be used in pressurized or non-pressurized curing chambers or baths. The cube molds are cast and machined from high quality brass in the USA. Non-corrosive, stainless steel bolts, plates, center tubes, and handles are ultra durable and will last a very long time with proper handling and maintenance. Each stack of molds produces two briquette specimens. Each stack contains 2 outer and 1 inner parts which can be disassembled after a test, cleaned and then reassembled. Thin grooves are milled onto one side of the separation plates to allow fluid pressure penetration into the cement sample. The mold sets are designed to stand up and placed using the supplied T-handle. An optional stainless steel bucket is available for water/oil separation testing requirements.


Tensile Briquette Molds Datasheets

Tensile Briquette Molds_Espanol


Part #; Specimen Qty; Weight; Dimensions Length x Width; Dimensions Height with Handle/Without
05-0080-1; 2; 3.6 lbs; 4.4” x 3.75”; 4”/2”
05-0080-2; 4; 7.1 lbs; 4.4” x 3.75”; 5.2”/3.2”
05-0080; 6; 10.6 lbs; 4.4” x 3.75”; 6.4”/4.4”
05-0080-3; 8; 14.1 lbs; 4.4” x 3.75”; 7.6”/5.6”


Available upon request is mold special purpose mold grease and hex driver for assembly/disassembly.

Need Additional Help?

Contact Us